Manufacturers of high-quality, hand-made concrete pavers, coping, and landscaping products. Each piece is individually crafted with a range of contemporary colours, ensuring vibrant, through-blended hues that enhance any outdoor space. Our products combine durability and aesthetic appeal, providing exceptional options for your landscaping needs.
Colours Available: Ivory, Merino, Desert Sand, Olive, Cocoa, Smokey Grey, Gun Metal, Charcoal
Size:
| Size |
Qty per m2 |
Qty per Pallet |
| 400 x 400 x 40 |
6.25 |
102 |
| 450 x 450 x 40 |
4.9 |
60 |
| 600 x 300 x 40 |
5.5 |
90 |
| 600 x 400 x 40 |
4.16 |
68 |
| 600 x 600 x 45 |
2.77 |
48 |
| 800 x 400 x 45 |
3.12 |
45 |
| 800 x 800 x 45 |
1.56 |
13 |
Material: Concrete
Recommended use: Paths, Patios, Courtyards, Pools, Steps
Bullnose available:
400 x 400 x 40mm
450 x 450 x 40mm
600 x 400 x 40mm
These pavers are made to order
Please allow 4-6 weeks
Technical Info:
With the use of natural products, some colour, tonal, size variations and air bubbles can be expected. Tolerances as per Australian standards include thickness +/‐ 2.5mm, dimension (plan) +/‐ 3mm and up to 4% chipped or damaged. Industry-standard is to order approx. 5% greater than the required area to accommodate cuts and damage due to handling. If you find any product that is outside tolerances or damaged, put them aside for cuts. Please note some textures have natural high and low points at edge due to surface design. Thicknesses are calculated on a mean basis.
Laying:
For best results, pavers should be laid on a concrete base using suitable adhesive. A flexible cement-based tile adhesive is preferred, or cement mortar but it should be free of salts. Using a 10mm notched trowel and sufficient adhesive/mortar to provide a solid bed of at least 3mm and level pavers individually.
Alternatively, road base of 100mm depending on use, well compacted in layers can be used with a screed of clean washed sand to approx. 20‐25mm. A grout line of 8mm to 12mm is recommended and small joint width variations will become unnoticeable after grouting.
Cleaning:
Clean pavers with hot water and a scrubbing brush. For stains and pre-cleaning before sealing, we recommend ANTI EFF. For protection and ease of cleaning, a quality penetrating sealer should be used, especially in high use areas, areas prone to moisture and especially around pool areas subject to salt and chemicals. See the relevant manufacturers guide.
